网站颜色:

forBMW ESYS ICOMfor宝马编程刷隐藏OBD数据线ENET eSYS v3.27.1

  • 品牌:奥博鼎

新BMW E-SYS ICOM 宝马 编程/刷隐藏OBD数据线

购买前提:您必须懂宝马工程师软件,自己会操作,我店不提供工程师技术指导。不提供安装教程。您必须自己会安装和使用。诊断和复杂一点的编程、刷隐藏必须使用ICOM设备。

此软件为下载版,文件大小约为50G左右,软件一旦售出概不退货,线发货前均已测试,请验货完好后签收,不接受任何理由退货。为避免不必要的麻烦,请在收到线后确认收货了 客服发软件下载地址

 

F系列工程师E-sys软件3.27.1+数据库V57.2(英文版)(15年3月份后生产的车辆或在这时间之后去4S编程过的,车辆集成等级为14-11-503以后的,需要使用这个版本,版)

   F系列工程师E-sys软件3.26.1+V54.2数据库  中文版

(15年3月份前生产的车辆,车辆版本集成等级为14-11-503之前的,两个版本均可使用,强烈建议使用这个版本,原版,稳定,相对操作容易,以4S技术员多年的实战经验以及远程N台车的经验,不到万不得已的情况下,尽量不要升级到15-03-500及以后的版本。)

    很多朋友问我中文稳定不稳定,在这普及下,中文版只是对软件的语言包做了个翻译,其他的程序依旧是原版程序,未做任何改动,所以请朋友们放心使用。另外也有人问刷隐藏会不会把模块刷死,单编会不会把模块编死,导致车子打不着不能开。首先要说刷车有风险,但是我们可以把这种可能性尽可能的降低,下面来说下防止刷死的工作:

    1.刷隐藏的时候所有的动力模块不要在车辆发动怠速的情况刷(包括DME EGS CAS ICM FEM BDC 等模块)车子电量充足的情况下建议开钥匙2档刷所有模块,如有条件可以给车子加个稳压电源。

    2.在对车辆进行单编整车编程升级的时候,不论编哪个模块,都不能将车辆着车和怠速,必须保证车辆有13V以上的电压,强烈建议使用专用稳压编程电源。

    3.不论在刷隐藏还是单编整编的过程中,都不要操作车辆的用电器,不要开关门,更不要去按启动按钮或者点火开关

  4.单编整编之前必须关掉车载蓝牙,取出单碟和6碟CD的碟片,拔掉USB设备。

备注:57.0数据库需要配合3.23.4/3.24.2及以上版本的ESYS软件才可以使用

 

PsdzData57.0支持新的NBT系统,2015款宝马全系支持!

F20 1系所有车型

F30 3系所有车型含2015款

F10 5系所有车型含2015款

F12 6系所有车型

F01/02 7系所有车型

F25 X3所有车型 包括2015 X3.

F15 X5所有车型

F16 新X6车型

 

 

【Fxx底盘的车型及编程时应选择的车型数据库】
(咨询特价)年后的第五代7系长轴距版(F01/F02/F04及5系GT版F07等。编程请选F001)
(咨询特价)年后的第六代5系(F10/F18。编程请选F010)
(咨询特价)年后的第六代5系旅行版(F11。编程请选F010)
(咨询特价)年后的第二代1系(F20。编程请选F020)
(咨询特价)年后的第二代X3X4(F25/F26。编程请选F025)
(咨询特价)年后的第三代X5X6(F15/F16。编程请选F025)
(咨询特价)年后的第三代6系2门敞篷版(F12/F13。编程请选F010)
(咨询特价)年后的第三代6系4门GranCoup(F12。请选F010)
(咨询特价)年后的第六代3系(F30。编程请选F020)
(咨询特价)年后的3系GT,2系4系M3(F32/F34/F80。编程请选F020

 (咨询特价)年后的新款MINI(F56。编程请选F56)

注:系统要求windows系统,建议WIN7/8 建议64位

 

此软件为下载版,文件大小约为50G左右,软件一旦售出概不退货,线发货前均已测试,请验货完好后签收,不接受任何理由退货。为避免不必要的麻烦,请在收到线后确认收货了 客服发软件下载地址

Product Introduction:

B.MW series single module programming or modules hiding ENET data line.

B.MW hidden ENET data cable , F series programming cable , the latest ESYS 3.23.4 and V50.3 data.

B.MW F series , the new 1 Series, 3 Series, 5 Series, 7 Series , GT, X3, brush hidden upscale programming line goes on sale !

Buy our ENET lines are presented E-SYS 3.23.4 software installation packages and ETOKEN and PIN.

This product uses the international top super-six production lines , shielding interference, signal transmission intensity , really pure copper wire, green insulation , not comparable to other lines .

 Product features:

One can hide modules or program single module

1. Lock unlock sound confirmation ( to prevent radio interference, add sound to confirm car locked when turn light confirmation inconvenient. This is setup in cic)

2. Can operate the navigation menu including watching dvd when driving( for driving safety. Let the side driver operate the navigation menu )

3. Display engine output and torque meter ( purely fun, look engine output )

4. Cancel confirmation screen big screen boot delay

5. Open the voice recognition function

6. Three kind of bluetooth phone ringtones ( personality only )

7. Increasing the cic memory address to 50

8. The glass automatically rise to the top process is not terminated by the car door ( easy to get off to close the window waiting )

9. The digital speed display ( fun only )

10. Air-conditioned memory of the last off state(without air conditioning season is more convenient )

11. Indoor cycling memories of the last time the state when engine off

12. A-pillar electric tailgate buttons and remote control a key to close the power tailgate. At any time terminate the reverse operation ( turn off 15 minutes or more reset )

13. Increasing shift paddles

14. The small screen to the large-screen display modify

15. Pdc display vertical and horizontal

16. Disable the seat belt status display - passenger seat

17. Disable the seat belt status display - driver seat

18. Disable seat belt reminder mistake ! The link is invalid. Device - passenger seat

19. Disable seat belt reminder - driving position

20. Disabled unfasten their seat belts voice prompts - passenger seat

21. Disabled unfasten their seat belts voice prompts - driving position

22. Intersection vehicle high beam automatic control ( no condition tested. Do not know if it is valid )

23. Angel eyes open and cancel functions

24 turn off the engine start-stop function turned on by default

25, gps time synchronization

26. Foot open the back cover

27. Ds show s1-s7 selection

28. Active sports gearbox program sport +

29. Single microphone settings

30. Engine off automatically unlock

31. Internet applications

32. Armrest usb playback video

33. The maximum distance disable front camera view

34. The maximum distance to disable the rear camera view

35. Maximum speed disable front camera view

36. The maximum speed to disable the rear camera view

   

-|-_-|-

深圳奥博鼎贸易热门设计联盟服务商