通用别克/雪佛兰/君威/检测编程设备 GM MDI GDS 提供在线帐号

商家促销，促销时间：2015-11-03 00:00 至 2016-01-31 (咨询特价)

一口价：(咨询特价) 促销价：1290.(咨询特价) FORD VCM2 II IDS V(咨询特价) /福特VCM 2/检测/编程/刷隐 藏/改灯/防盗 一口价：(咨询特价) 促销价：2330.(咨询特价) 宝马诊断仪 BMW ICOM A2检 测编程/刷隐藏 10月份软件 免费升级 一口价：(咨询特价) 促销价：4450.(咨询特价) BMW ICOM A2/A3 宝马检测 编程/汉化+联想E49+10月份软 件 免费升级 一口价：(咨询特价) 促销价：1440.(咨询特价) 通用别克/君越/凯迪拉克/三 代检测仪GM MDI可在线编 程 提供账号 一口价：(咨询特价) 促销价：2200.(咨询特价) SCANIA VCI2 SDP3 v2.18斯 卡尼亚卡车柴油车检测仪 铁 壳 多语言 一口价：(咨询特价) 促销价：1350.(咨询特价) DA-VINA 2534 路虎诊断 仪 JLR V138 编程 汉化加 装导航 一口价：(咨询特价) 促销价：3200.(咨询特价) 斯巴鲁原厂检测仪 SUBARUS elect Monitor III 一口价：(咨询特价) 促销价：2690.(咨询特价) 最新款宝马奔驰专用编程电源 充电器 汽车编程稳痒 一口价：(咨询特价) 促销价：1250.(咨询特价) 现代起亚检测仪 GDS VCIDi agnostic Tool For Hyund ai Kia 一口价：(咨询特价) 促销价：6950.(咨询特价) Porsche piwis tester II 保时捷检测仪 原装松下CF3 0触屏 V(咨询特价) 一口价：(咨询特价) 促销价：2450.(咨询特价) BMW ICOM A2/A3 最新宝马 检测诊断编程 15年10月份专 家版+工程师 一口价：(咨询特价) 促销价：1250.(咨询特价) Ford VCM2 / Mazda马自达 VCM2 检测/编程/ IDS V96 .03免费升级 一口价：(咨询特价) 促销价：480.(咨询特价) 大众/奥迪VAS5054/VAS5054A 引导功能,带OKI,支持UDS,od is v2.0 一口价：(咨询特价) 促销价：1750.(咨询特价) 通用专用别克君越无线检测仪 GM MDI GDS支持在线编程内 置WIFI卡 一口价：(咨询特价) 促销价：1570.(咨询特价) 通用别克/雪佛兰/君威/检测 编程设备 GM MDI GDS 提供 在线帐号 一口价：(咨询特价) 促销价：5500.(咨询特价) 沃尔沃卡车检测仪 Volvo V CADS 3 Volvo truck diag nostic tool 查看所有宝贝

同类宝贝推荐更多宝贝>>

一口价：1400.(咨询特价) DA-VINA 2534 路虎诊断 仪 JLR V138 编程 汉化加 装导航 一口价：490.(咨询特价) 大众/奥迪VAS5054/VAS5054A 引导功能,带OKI,支持UDS,od is v2.0 一口价：2150.(咨询特价) 通用专用别克君越无线检测仪 GM MDI GDS支持在线编程内 置WIFI卡 一口价：2700.(咨询特价) 宝马诊断仪 BMW ICOM A2A 3 检测编程/刷隐藏 2月软件 免费升级 一口价：5500.(咨询特价) 沃尔沃卡车检测仪 Volvo V CADS 3 Volvo truck diag nostic tool 一口价：7600.(咨询特价) Porsche piwis tester II 保时捷检测仪 原装松下CF3 0触屏 V(咨询特价) 一口价：4500.(咨询特价) Chrysler Diagnostic Tool (WITECH VCI POD)克莱斯勒 故障诊断仪 一口价：2100.(咨询特价) Ford IDS VCM 2 II 福特 VCM2检测仪 IDS V92.5+刷车 大师 包教会 一口价：1400.(咨询特价) 通用别克/君越/凯迪拉克/三 代检测仪GM MDI 可在线编 程 提供账号 一口价：2800.(咨询特价) BMW ICOM A3 最新宝马检测 诊断编程 15年2月份专家版 +工程师版 一口价：1300.(咨询特价) FORD IDS VCM2 II 马自达 检测/编程/防盗设备 IDS 9 (咨询特价) 免费升级 一口价：5000.(咨询特价) BMW ICOM A2/宝马A2 检测 /编程/汉化+联想E49+2月份软 件 免费升级 一口价：1460.(咨询特价) FORD VCM2 II IDS V(咨询特价) /福特VCM 2/检测/编程/刷隐 藏/改灯/防盗 一口价：580.(咨询特价) 新版宝马工程师编程改装汉化 技术培训教材(入门到精通) 一口价：1600.(咨询特价) Cummins Inline5 CumminsI NSITE 7.6康明斯柴油车故障 诊断仪 一口价：200.(咨询特价) 通用雪佛兰 别克 君威 君 越 凯迪拉克 GM MDI GDS在 线编程帐号 一口价：1700.(咨询特价) 通用别克/雪佛兰/君威/检测 编程设备 GM MDI GDS 提供 在线帐号 一口价：3300.(咨询特价) 最新款宝马奔驰专用编程电源 充电器 汽车编程稳痒 查看所有宝贝

满减包邮   活动日期：2014-08-15 00:00 -- 2014-09-30 (咨询特价)

单笔订单买满(咨询特价)，立减50；

 免费安装GDS/TECH2WIN 软件  

硬件可升级,目前更新到V8.1 

软件免费安装和更新 提供原厂帐号 在线编程

此款设备与4S店的功能完全相同, 免费官网下载安装GDS2, TECH2WIN,MDI MANAGER等软件. 适用于凯迪拉克,通用,雪佛兰科鲁兹,别克新君越更换气囊电脑,变速箱,发动机电脑,在线编程.

可装欧宝软件和RDS(支持新赛欧和新凯越在线编程2010-2014年),激活后收费,终生使用!

详细费用请客服邮件 !

凡是在本店购买此款产品的朋友会享受软件和硬件终生免费升级服务,在线免费远程安装软件 ,免费技术指导 

 咨询912 黄先生

原厂主板:

 (咨询特价)13年 支持Pass-Thru 方式的维修编程

(咨询特价)13年  全部支持TISweb在线编程

通用最新检测仪MDI--是美国通用公司提供给通用特约维修站使用的第三代检测仪，2009年后的通用的大部分车型，是通用汽车全球服务站必备产品.

MDI是美国ETAS公司针对GM装备有多路传输系统(4 GMLINE)的新车型提供电子故障诊断和维修编程的专用维修设备，该系统需配合PC机使用。目前只能检测部分GM新车型，老车型还需用TECH2进行检测。MDI可对所有GM车型进行编程，且编程速度比TECH-2有很大提高。

 MDI模块功能：

1.GDS2原厂软件，具有强大的和全面的检测功能，测试动力系统，车身和底盘

2.支持2009年后的所有通用车系，包括北美通用，上海通用，凯迪拉克，saab萨博,GMC,等车型

3.支持有线网络和USB连接

(咨询特价)00-2012年 支持Pass-Thru 方式的维修编程

(咨询特价)09年之后支持车辆诊断和在线编程

6.缩短维修编程时间,GMLAN通讯协议的ECU编程时间为目前使用Tech2的1/3

7.可以对新君威，新君袁科鲁兹，英朗,GL8 MPV车型节气门学习(08年-09的君越也可以进行节气门学习）

8.可以在线匹配新君威，新君袁科鲁兹，英朗车型钥匙（增加或是全丢都可以，不用拆解BCM）

9.可以对1999-2009年之间的大多车型在线编程。包括发动机，变速箱等电脑

10.下载软件包括 MDI Manager，GDS2,TECH2WIN,Quickstart全面

11.专业的售后团队，远程支持解答修车问题，使你没有受顾之忧

Multiple Diagnostic Interface

Description:

GM MDI (Multiple Diagnostic Interface) for wireless ECU reprogramming utilizing J2534. Hardware kit only.

The GM MDI is initially being introduced with Pass-Thruprogramming capabilities only. It can be used to perform

Pass-Thru programming on all vehicles built since 1993 and willsupport all vehicles into the future.The GM MDI will

be required to perform diagnostics onselected NAO vehicles for model year 2009. Diagnostic soft-ware is scheduled to

be released for the GM MDI during thefourth quarter of 2008.

When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data

duringa road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this

purpose. Regulations require programming procedures to be compliantwith SAE Recommended Practice J2534. The GM SPS

is com-pliant with SAE Recommended Practice J2534, and the GMMDI is compliant with the portions of SAE J2534 that

areapplicable for GM vehicles.

The Future of the Tech 2
The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models

when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles

fromprevious model years. Remote programming with the Tech 2 will continue to be supported for use on all 2007 and

previous vehicles.Additional information will be supplied in future.

Specifications

complete genuine GM MDI

Introduction of MDI

The GM MDI is a compact communication module that manages the transfer of data between a vehicle’s onboard

ECU network and a PC.The EL-47955 MDI is a kit of components:

A GM MDI
B J1962 Diagnostic connector
C USB cable
D Ethernet cable
E AC adapter/power supply
Wireless interface
AAA batteries
Owner manual

Operating software for the MDI will be downloaded from the TS2WEB website.

The GM MDI allows the user to perform Pass-Thru programming procedures using software running on a laptop or desktop PC.

What Protocols does the GM MDI Support@
For immediate use -- At present,vehicles have two buses on the 16 pin connector (high speed and low speed GMLAN).
The GM MDI communicates using all of the existing GM protocols, the same as the Tech2:
– UART
– Class 2
– KWP(咨询特价)
– GMLAN (CAN)
For future use -- Global architecture coming in July 2008 for MY 2009 will use a total of 4 GMLAN links. (This is
a limited rollout in MY 2009.) Global architecture adds a medium speed bus and an expansion bus. The Tech 2 and
CANdi module can run only low and high speed, and won’t work on the 4 GMLAN link system for diagnostics or programming. The MDI will have this capability.

How is the GM MDI Connected@
The GM MDI will be connected between the vehicle and the PC using the DLC and cable.Connection between the GM MDI and the PC can be accomplished several ways:

– Using the supplied cable to connect the mini USB port on the GM MDI and the USB port on the PC
– Using a standard CAT5 cable toconnect the Ethernet port on the GM MDI and the Ethernet port on the PC
– Using the WLAN card built into the
GM MDI to communicate with the PC through the dealership’s wireless network.

How Will the GM MDI be Used@

The GM MDI is initially being introduced with Pass-Thru programming capabilities only. It can be used to perform
Pass-Thru programming on all vehicles built since 1993 and will support all vehicles into the future.

The GM MDI will be required to perform diagnostics on selected NAO vehicles for model year 2009. Diagnostic software is scheduled to be released for the GM MDI during the fourth quarter of 2008. When diagnostics are introduced, the MDI will also get a remote data record capability. This permits recording data during a road test, similar to the Tech 2 Snap Shot function. A trigger switch connector is provided for this purpose.

Regulations require programming procedures to be compliant with SAE Recommended Practice J2534. The GM SPS is compliant with SAE Recommended Practice J2534, and the GM MDI is compliant with the portions of SAE J2534 that are applicable for GM vehicles.

The Tech 2 remains an essential tool through at least the 2010 model year. The GM MDI will not support past models when its diagnostic capabilities are introduced. And, the Tech2 will continue to be needed to diagnose all vehicles from previous model years.
Remote programming with the Tech 2 will continue to be supported for use on all 2007 and previous vehicles.
 

Additional information will be supplied in future TechLink articles and dealer communications.